wget http://downloads.sourceforge.net/project/igmpproxy/igmpproxy/0.1/igmpproxy-0.1.tar.gz
tar zxf igmpproxy-0.1.tar.gz
cd igmpproxy-0.1

 ##------------------------------------------------------
 ## Enable Quickleave mode (Sends Leave instantly)
 ## Эту строчку раскомментируют только в том случае,
 ## если внути всего лишь один клиент IP TV
 ##------------------------------------------------------
 #quickleave
 
 ##------------------------------------------------------
 ## Configuration for eth0 (Upstream Interface)
 ## Здесь указаны параметры для публичного интерфейса,
 ## на который придет поток от провайдера
 ## и указаны сети, с которых возможно будут подключаться клиенты
 ##------------------------------------------------------
 phyint eth0 upstream ratelimit 0 threshold 1
 altnet 10.0.0.0/8
 altnet 172.20.20.0/24
 altnet 192.168.0.0/24
 
 ##------------------------------------------------------
 ## Configuration for eth1 (Downstream Interface)
 ## Типовая конфигурация для внутреннего интерфейса
 ## смотрящего в домашнюю сеть
 ##------------------------------------------------------
 phyint eth1 downstream ratelimit 0 threshold 1

#!/bin/sh
### BEGIN INIT INFO
# Provides: igmp proxy
# Required-Start: $remote_fs
# Required-Stop: $remote_fsx
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: Example initscript
# Description: IGMP Proxy init file
 ### END INIT INFO
 # Do NOT "set -e"
 # PATH should only include /usr/* if it runs after the mountnfs.sh script
 #PATH=/sbin:/usr/sbin:/bin:/usr/bin
 DESC="IGMP Proxy"
 NAME=igmpproxy
 DAEMON=/usr/local/sbin/$NAME
 DAEMON_ARGS="/etc/igmpproxy.conf"
 PIDFILE=/var/run/$NAME.pid
 SCRIPTNAME=/etc/init.d/$NAME
 # Exit if the package is not installed
 [ -x "$DAEMON" ] || exit 0
 # Read configuration variable file if it is present
 [ -r /etc/default/$NAME ] && . /etc/default/$NAME
 # Load the VERBOSE setting and other rcS variables
 . /lib/init/vars.sh
 # Define LSB log_* functions.
 # Depend on lsb-base (>= 3.0-6) to ensure that this file is present.
 . /lib/lsb/init-functions
 #
 # Function that starts the daemon/service
 #
 do_start()
 {
 # Return
 # 0 if daemon has been started
 # 1 if daemon was already running
 # 2 if daemon could not be started
 start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \
 || return 1
 start-stop-daemon --start --quiet --background --make-pidfile --pidfile $PIDFILE --exec $DAEMON -- \
 $DAEMON_ARGS \
 || return 2
 # Add code here, if necessary, that waits for the process to be ready
 # to handle requests from services started subsequently which depend
 # on this one. As a last resort, sleep for some time.
 }
 #
 # Function that stops the daemon/service
 #
 do_stop()
 {
 # Return
 # 0 if daemon has been stopped
 # 1 if daemon was already stopped
 # 2 if daemon could not be stopped
 # other if a failure occurred
 start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name $NAME
 RETVAL="$?"
 [ "$RETVAL" = 2 ] && return 2
 # Wait for children to finish too if this is a daemon that forks
 # and if the daemon is only ever run from this initscript.
 # If the above conditions are not satisfied then add some other code
 # that waits for the process to drop all resources that could be
 # needed by services started subsequently. A last resort is to
 # sleep for some time.
 start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON
 [ "$?" = 2 ] && return 2
 # Many daemons don't delete their pidfiles when they exit.
 rm -f $PIDFILE
 return "$RETVAL"
 }
 #
 # Function that sends a SIGHUP to the daemon/service
 #
 do_reload() {
 #
 # If the daemon can reload its configuration without
 # restarting (for example, when it is sent a SIGHUP),
 # then implement that here.
 #
 start-stop-daemon --stop --signal 1 --quiet --pidfile $PIDFILE --name $NAME
 return 0
 }
 case "$1" in
 start)
 [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME"
 do_start
 case "$?" in
 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
 esac
 ;;
 stop)
 [ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
 do_stop
 case "$?" in
 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
 esac
 ;;
 #reload|force-reload)
 #
 # If do_reload() is not implemented then leave this commented out
 # and leave 'force-reload' as an alias for 'restart'.
 #
 #log_daemon_msg "Reloading $DESC" "$NAME"
 #do_reload
 #log_end_msg $?
 #;;
 restart|force-reload)
 #
 # If the "reload" option is implemented then remove the
 # 'force-reload' alias
 #
 log_daemon_msg "Restarting $DESC" "$NAME"
 do_stop
 case "$?" in
 0|1)
 do_start
 case "$?" in
 0) log_end_msg 0 ;;
 1) log_end_msg 1 ;; # Old process is still running
 *) log_end_msg 1 ;; # Failed to start
 esac
 ;;
 *)
 # Failed to stop
 log_end_msg 1
 ;;
 esac
 ;;
 *)
 #echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2
 echo "Usage: $SCRIPTNAME {start|stop|restart|force-reload}" >&2
 exit 3
 ;;
 esac
 :